bronco_dd Posted March 5, 2013 Report Share Posted March 5, 2013 hey,im just thinking ahead to when my bronco is done,when you guys do runs where are they normally?would there be any holes large enough for me to have a challenge.its not much of a dirt road puddle runner lol Link to comment Share on other sites More sharing options...
TomWood Posted March 5, 2013 Report Share Posted March 5, 2013 Im sure there are some trails around with off shoots that would be a challenge, also that would be a good rig to do some trail breaking on some current trails. Link to comment Share on other sites More sharing options...
bronco_dd Posted March 5, 2013 Report Share Posted March 5, 2013 sweet im in . Link to comment Share on other sites More sharing options...
4x4Mckay Posted March 5, 2013 Report Share Posted March 5, 2013 There is always a mud hole off the beaten trail ! :ninja: Link to comment Share on other sites More sharing options...
TomWood Posted March 5, 2013 Report Share Posted March 5, 2013 Yup, we might be able to expand bump n grind now :), plus I have a spot in mind at renfrew. Link to comment Share on other sites More sharing options...
bronco_dd Posted March 5, 2013 Report Share Posted March 5, 2013 ill do what i can lol its posi front and back so i should be able to chew Link to comment Share on other sites More sharing options...
72LandRover88 Posted March 5, 2013 Report Share Posted March 5, 2013 ill do what i can lol its posi front and back so i should be able to chew I read this as "get much more stuck!" Link to comment Share on other sites More sharing options...
TomWood Posted March 5, 2013 Report Share Posted March 5, 2013 We will definitely need the hummer, Guys Bronco, or im sure Daves Zuk would pull him from any stucks lol. Cant wait to see it on the trail! Link to comment Share on other sites More sharing options...
bronco_dd Posted March 5, 2013 Report Share Posted March 5, 2013 Yeah it wouldn't take me long to get buried and I'll make a huge boat anchor Link to comment Share on other sites More sharing options...
Potato Digger Posted March 5, 2013 Report Share Posted March 5, 2013 How many trucks does it take to pull out a Super Bronco? :smiley-think005: Link to comment Share on other sites More sharing options...
TomWood Posted March 5, 2013 Report Share Posted March 5, 2013 One! Daves Zuk! Link to comment Share on other sites More sharing options...
bronco_dd Posted March 5, 2013 Report Share Posted March 5, 2013 what exactly is a zuk? Link to comment Share on other sites More sharing options...
TomWood Posted March 5, 2013 Report Share Posted March 5, 2013 He has a Suzuki, not sure the model, but it may fit under your bronco. He has pulled a full size bronco before. Link to comment Share on other sites More sharing options...
TRUXterra Posted March 5, 2013 Report Share Posted March 5, 2013 Even after I install my 12k lb winch and using a snatch block to double the line & pulling strength will likely have me in the same hole beside you. I'm at just over 5000lbs, how much does your beast weigh? Link to comment Share on other sites More sharing options...
Eastcoastcam Posted March 5, 2013 Report Share Posted March 5, 2013 Even after I install my 12k lb winch and using a snatch block to double the line & pulling strength will likely have me in the same hole beside you. I'm at just over 5000lbs, how much does your beast weigh? Devin, we would probably need to use our winches to GET to where he gets stuck in a hole :P lol! Link to comment Share on other sites More sharing options...
TRUXterra Posted March 5, 2013 Report Share Posted March 5, 2013 or a tree farmer/skidder, a D9 dozer, excavator, UFO (beam me up Bronco)... Link to comment Share on other sites More sharing options...
RobertMcC Posted March 5, 2013 Report Share Posted March 5, 2013 H2, when Guy gave scott a pitty recovery. Link to comment Share on other sites More sharing options...
BlackPrintz Posted March 5, 2013 Report Share Posted March 5, 2013 Curb weight for an 88 Bronco was listed at 4700+, about the same as my Grand. I'm guessing this one might be a little more. :king: Link to comment Share on other sites More sharing options...
guymacdonald Posted March 6, 2013 Report Share Posted March 6, 2013 He has a Suzuki, not sure the model, but it may fit under your bronco. He has pulled a full size bronco before. hey I resemble that remark......... :smiley-transport027: :smiley-sad058: Link to comment Share on other sites More sharing options...
bronco_dd Posted March 13, 2013 Report Share Posted March 13, 2013 i have no idea i have to take it to the scales when its rolling.i know the skidsteer will barely pick it up now and it would easily before. Link to comment Share on other sites More sharing options...
autumnwalker Posted March 13, 2013 Report Share Posted March 13, 2013 I scaled mine recently at 7,250 lbs; that is 3.625 tons. In the same week I scaled it I pulled a loaded semi-truck out of a snowbank. I think I have you covered... if I can get to you. haha Link to comment Share on other sites More sharing options...
TomWood Posted March 13, 2013 Report Share Posted March 13, 2013 Scott definitely has the power to do it, so does Guy. Link to comment Share on other sites More sharing options...
bronco_dd Posted March 13, 2013 Report Share Posted March 13, 2013 Haha ok i'll bring a long strap Link to comment Share on other sites More sharing options...
RobertMcC Posted March 14, 2013 Report Share Posted March 14, 2013 Renfew would be good once spring hits.... Link to comment Share on other sites More sharing options...
bronco_dd Posted March 14, 2013 Report Share Posted March 14, 2013 i can go through the rawdon end and meet you i have family that lives there Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.