Powerram Posted December 6, 2016 Report Share Posted December 6, 2016 So I'll throw this up on this for the back country members first.I'm going to sell the Ford for sure. it would need a bit of love to be perfect but what wheeler wouldnt Here is the list. -Rcv front axle shafts -30 spline warn hubs -front auto locker -351w with good torquy low end camshaft -Np435 4 speed manual trans with hyd clutch -np208 transfercase -6" lift system -9" rear end , have auto locker for it but not in it - Cb -grant steering wheel -bushwacker cutout fender flares -Brand new 35" 12.5 r 15 BFG MudTerrains -alumnium rad and electric fans Clutch was done last summer, engine has new cam,lifters and brand new Rochester carb,n we starter, has headers and dual exhaust, 100% new brake lines front to back, and brakes are in 75% range. body is dented all over, but has no rust or body fill. I have welded one cab corner in and will weld the other before sale. That was the only rust in the whole truck. It is from Alberta. It will need a windshield because I caught a low hanging tree and it broke. I'm sure there is lots more I'm forgetting, has current safety. I'm looking for $4500 firm as I have over $7000 invested in parts alone. This is a turn key wheeler ready to run. And I know every inch of this truck and can show you any thing and everything I am aware of with this truck. Thanks for looking, I'm sure there is more I'm forgetting and club members can vouch for truck credibility. it will fit up to 39" tires with rubbing on radius arms, with the tire and wheel combo on currently rubbing is almost eliminated. I'm sure I'm forgetting more things Front bumper, winch and light bar not included, stock type bumper will be in its place Link to comment Share on other sites More sharing options...
sar4x4 Posted December 6, 2016 Report Share Posted December 6, 2016 No no no no no! Lol What will you wheel? Link to comment Share on other sites More sharing options...
Powerram Posted December 6, 2016 Author Report Share Posted December 6, 2016 4 minutes ago, sar4x4 said: No no no no no! Lol What will you wheel? No worries, new beast in the works and keeping it fullsize Link to comment Share on other sites More sharing options...
SQRLPWR Posted December 6, 2016 Report Share Posted December 6, 2016 Matt has form, so I'm not surprised....but will be sad to see the Beast go! Link to comment Share on other sites More sharing options...
Powerram Posted December 6, 2016 Author Report Share Posted December 6, 2016 53 minutes ago, jay said: Matt has form, so I'm not surprised....but will be sad to see the Beast go! Going to be more traditional build for me this time, 1 tons, gear drive transfer case, big block engine, no plastic flares Link to comment Share on other sites More sharing options...
SQRLPWR Posted December 6, 2016 Report Share Posted December 6, 2016 u resurrecting the old Power Wagon ? Link to comment Share on other sites More sharing options...
Powerram Posted December 6, 2016 Author Report Share Posted December 6, 2016 1 minute ago, jay said: u resurrecting the old Power Wagon ? I never thought of that for this build, sometimes i forget I even have it down there Link to comment Share on other sites More sharing options...
SQRLPWR Posted December 6, 2016 Report Share Posted December 6, 2016 Well that's a nice problem to have LOL I really like the look of that old Power Wagon. Link to comment Share on other sites More sharing options...
Powerram Posted December 6, 2016 Author Report Share Posted December 6, 2016 Just now, jay said: well that's a nice problem to have LOL No, no it's not lol, too many things on the go, that's y I'm clearing out the stables for prices that make em move Link to comment Share on other sites More sharing options...
Powerram Posted December 6, 2016 Author Report Share Posted December 6, 2016 4 minutes ago, jay said: Well that's a nice problem to have LOL I really like the look of that old Power Wagon. Who knows, it might go next for irresistible price Link to comment Share on other sites More sharing options...
Powerram Posted December 6, 2016 Author Report Share Posted December 6, 2016 32 minutes ago, jay said: well that's a nice problem to have LOL like $2000 for the power wagon Link to comment Share on other sites More sharing options...
SQRLPWR Posted December 6, 2016 Report Share Posted December 6, 2016 damn...I can't see you having any issues selling at that price :O Link to comment Share on other sites More sharing options...
derekmac Posted December 6, 2016 Report Share Posted December 6, 2016 52 minutes ago, jay said: damn...I can't see you having any issues selling at that price :O Good project for you Jay.... :D Link to comment Share on other sites More sharing options...
SQRLPWR Posted December 6, 2016 Report Share Posted December 6, 2016 Stop that! LOL I just about survived the 1st Zuk....Chads was a close one, so no more projects LOL Link to comment Share on other sites More sharing options...
Powerram Posted December 6, 2016 Author Report Share Posted December 6, 2016 40 minutes ago, jay said: Stop that! LOL I just about survived the 1st Zuk....Chads was a close one, so no more projects LOL I can deliver it, has PTO driven winch, 4speed manual, throaty wide block v8 runs great, Link to comment Share on other sites More sharing options...
Powerram Posted December 6, 2016 Author Report Share Posted December 6, 2016 3 minutes ago, Powerram said: I can deliver it, has PTO driven winch, 4speed manual, throaty wide block v8 runs great, 43 minutes ago, jay said: Stop that! LOL I just about survived the 1st Zuk....Chads was a close one, so no more projects LOL I'll even throw in a set of super rare 15" 8 lug wheels to fit that truck so u can run the tires you have on the 15" wheels Link to comment Share on other sites More sharing options...
sar4x4 Posted December 6, 2016 Report Share Posted December 6, 2016 ^ I had such rims! When I went from 1/2 ton to 3/4 ton axles. Then when I switched from the 8 lug D44 (front) to my first D60, I had to grind the calipers, and then eventually when I went to my second D60 (different gear ratio), I got 17" rims and tires. The rims weren't so rare a few years ago, but getting rarer. Bought them off of the 'Bargain Hunter', it was paper, before Kijiji! Link to comment Share on other sites More sharing options...
82Yota Posted December 6, 2016 Report Share Posted December 6, 2016 Maaaaaaan wtf. I'll trade you a FWD ranger for it haha. Good luck with the sale though. Whoever gets it is getting a smokin deal Link to comment Share on other sites More sharing options...
Powerram Posted December 6, 2016 Author Report Share Posted December 6, 2016 52 minutes ago, 82Yota said: Maaaaaaan wtf. I'll trade you a FWD ranger for it haha. Good luck with the sale though. Whoever gets it is getting a smokin deal It's not really listed yet, figure I'd let back country people see it first, then I'll post it so the world will see it. Then it will probably move. Also have to find a few min to weld the cab corner up so I can fix the big dent in the box to a small dent lol Link to comment Share on other sites More sharing options...
82Yota Posted December 6, 2016 Report Share Posted December 6, 2016 48 minutes ago, Powerram said: It's not really listed yet, figure I'd let back country people see it first, then I'll post it so the world will see it. Then it will probably move. Also have to find a few min to weld the cab corner up so I can fix the big dent in the box to a small dent lol If I had the cash I'd buy that for sure man. Jealous of whoever buys it Link to comment Share on other sites More sharing options...
Powerram Posted December 6, 2016 Author Report Share Posted December 6, 2016 13 minutes ago, 82Yota said: If I had the cash I'd buy that for sure man. Jealous of whoever buys it Yeah, turn key rig, I usually never sell my rigs, they end up being parted out to the cause , but nothing from this truck is needed for the next truck cept the bumper and winch Link to comment Share on other sites More sharing options...
82Yota Posted December 6, 2016 Report Share Posted December 6, 2016 14 minutes ago, Powerram said: Yeah, turn key rig, I usually never sell my rigs, they end up being parted out to the cause , but nothing from this truck is needed for the next truck cept the bumper and winch Cant believe that you're selling it... Link to comment Share on other sites More sharing options...
Powerram Posted December 7, 2016 Author Report Share Posted December 7, 2016 10 minutes ago, 82Yota said: Cant believe that you're selling it... Just gotta thin the herd Link to comment Share on other sites More sharing options...
82Yota Posted December 7, 2016 Report Share Posted December 7, 2016 Looking into selling some crap cause I want this. Im doubtful that I can raise the cash but worth a shot. Link to comment Share on other sites More sharing options...
Jawritch Posted December 7, 2016 Report Share Posted December 7, 2016 I would love to have the power wagon. But like all of us too many projects on the go. Jeep, tracker, ram... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.