sar4x4 Posted July 12, 2010 Report Share Posted July 12, 2010 We finally mounted a Warn 8274 on the Big Dodge. We had the 40s on it last year. New for this year we have a 6" lift and the winch. Bought the winch used two or more years ago and it's been sitting in the corner ever since! I'll have to get new pictures now that the mount is painted (and bolts and fairlead)! AJ says bumper ends are next............... Link to comment Share on other sites More sharing options...
sar4x4 Posted July 15, 2010 Report Share Posted July 15, 2010 Driveshaft notch. This was a new cross-member last summer after the original one was rusted and twisted the summer before. He had to cut a chunk out of the main member and brace it across the back. This is to give clearance for the front driveshaft after the 6" lift this year. Driveshaft not installed yet. Link to comment Share on other sites More sharing options...
sar4x4 Posted July 15, 2010 Report Share Posted July 15, 2010 Painted winch bumper, winch fully installed and tested. Roller fairlead to come later, but actually AJ says he will buy winch rope instead. Link to comment Share on other sites More sharing options...
sar4x4 Posted July 15, 2010 Report Share Posted July 15, 2010 Retubed the driveshaft with a longer tube. Extension required because of the 6" lift, the driveshaft was completely apart at the slip joint! Link to comment Share on other sites More sharing options...
RattX Posted July 15, 2010 Report Share Posted July 15, 2010 Nice beefy weld on that driveshaft... :rolleyes: Link to comment Share on other sites More sharing options...
90bronco Posted July 15, 2010 Report Share Posted July 15, 2010 :rolleyes: nice strong job . Link to comment Share on other sites More sharing options...
muddystamper Posted July 16, 2010 Report Share Posted July 16, 2010 looks like it's coming along nicely! Link to comment Share on other sites More sharing options...
sar4x4 Posted July 23, 2010 Report Share Posted July 23, 2010 Driveshaft ended up a bit too long..... had to make some adjustments! Anyway, AJ had his daughter for the week and so the Dodge is going how it was last Friday, but should be good. In short, about 3" higher and a winch compared to last year. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.