autumnwalker Posted June 11, 2019 Report Share Posted June 11, 2019 Sounds like a plan. In for pics of progress! Link to comment Share on other sites More sharing options...
Powerram Posted June 12, 2019 Author Report Share Posted June 12, 2019 14 hours ago, autumnwalker said: Sounds like a plan. In for pics of progress! Some pics as is for some before and after comparisons Link to comment Share on other sites More sharing options...
autumnwalker Posted June 12, 2019 Report Share Posted June 12, 2019 I like the boat tie downs on the side of the bed Link to comment Share on other sites More sharing options...
Powerram Posted June 15, 2019 Author Report Share Posted June 15, 2019 So, while looking for parts on amazon, rock auto, tdot performance , I stumbled onto parts monkey .ca so I ordered my clutch kit from them, had a smoking deal on heavy duty clutch kit which specifies upped horse power(not this truck) and or abusive use with towing, off roading . definately applies and ordered a new flywheel at the same time.. So have that coming, hopefully it doesn't take too long, also ordered a new rad support for this gas truck. Its $190 CDN, can't go wrong with that price. Link to comment Share on other sites More sharing options...
Powerram Posted June 15, 2019 Author Report Share Posted June 15, 2019 Got the front bumper on the truck now, looks a bit better Link to comment Share on other sites More sharing options...
autumnwalker Posted June 17, 2019 Report Share Posted June 17, 2019 Looks a ton better! Loving the progress. You'll have to give us an update on partsmonkey.ca - I have not heard of them before. Link to comment Share on other sites More sharing options...
sar4x4 Posted June 17, 2019 Report Share Posted June 17, 2019 12 hours ago, autumnwalker said:  You'll have to give us an update on partsmonkey.ca - I have not heard of them before. I was thinking the same thing.  I’ve used all of the other three mentioned.  I’ve had great luck with Amazon and RA.  TDot I wasn’t overly impressed with, but they tried hard to correct things, so I will give them another try when they have the right price. Link to comment Share on other sites More sharing options...
SQRLPWR Posted June 18, 2019 Report Share Posted June 18, 2019 On 6/16/2019 at 9:19 PM, autumnwalker said: Looks a ton better! Loving the progress. You'll have to give us an update on partsmonkey.ca - I have not heard of them before. I've used them a 3Â times.....the first 2 orders were great, the 3rd wasn't fulfilled and they left me hanging with no notification whilst I patiently waited for a delivery that was never going to happen. When I called them they said they were never going to send the order. That being said, it was Xterra parts so I'd imagine more common parts shouldn't be an issue. I just didn't like how they handled my 3rd order, but I'd use them again in a pinch. Link to comment Share on other sites More sharing options...
autumnwalker Posted June 18, 2019 Report Share Posted June 18, 2019 2 hours ago, jay said: I've used them a 3Â times.....the first 2 orders were great, the 3rd wasn't fulfilled and they left me hanging with no notification whilst I patiently waited for a delivery that was never going to happen. When I called them they said they were never going to send the order. That being said, it was Xterra parts so I'd imagine more common parts shouldn't be an issue. I just didn't like how they handled my 3rd order, but I'd use them again in a pinch. Did they at least refund you? Link to comment Share on other sites More sharing options...
SQRLPWR Posted June 18, 2019 Report Share Posted June 18, 2019 yes they did Link to comment Share on other sites More sharing options...
Powerram Posted June 20, 2019 Author Report Share Posted June 20, 2019 Iv used tdot for some of my go fast parts in the past, I like them, quick and easy to deal with and will work with you if something isnt right, parts monkey has e mailed me and informed part of my order isnt available, so they found the same part , different brand , price is more, but sending it for the original price.I'm Happy with that. Link to comment Share on other sites More sharing options...
SQRLPWR Posted June 20, 2019 Report Share Posted June 20, 2019 Yeah TDOT have been good for me too. Sounds like you'll have ur parts soon  Link to comment Share on other sites More sharing options...
sar4x4 Posted June 20, 2019 Report Share Posted June 20, 2019 I was in Fredericton on Tuesday, so I stopped at an old haunt - 4WheelParts. I've always had great luck with them. With 96 stores continent-wide, they have INCREDIBLE buying power / prices. I noticed they had some Lube Locker diff gaskets on the wall. So I got 2 Dana 44, and 1 Dana 60. No GM 14Bolt in stock. They had lots of synthetic rope shackles on the shelf, and MANY MANY other things. I was in a hurry, and realized I should have had a list ready.... I have lists for many other things and suppliers, but I had let them slip off my radar. I won't do that again! Having said that, they seem to/might concentrate on bigger selling items. I've bought quite a few parts for my bro's 2008 Cummins... (Over 400k kms at the moment!) Getting a specialty part for a '79 Scout from an obscure supplier, not so much. And like I've mentioned before, I've used TDot, Amazon.ca, RA of course, and many many many specialty suppliers like Off Road Design (mostly GM square-body specialist), Super Scout Specialists and IH Parts America (both Scout specialists), and not to forget LMC Truck (CDN prices shown including delivery and any customs!) And a few others. Including Back Country Binders (Scout), and Blue Torch Fab.  I've been buying for a few decades................ Link to comment Share on other sites More sharing options...
autumnwalker Posted June 20, 2019 Report Share Posted June 20, 2019 We should try and revamp / revive our club sponsors. We used to have good deals with various local and online retailers. Link to comment Share on other sites More sharing options...
Powerram Posted July 9, 2019 Author Report Share Posted July 9, 2019 Got some work done on the crew cab, swapped front bence for buckets and center console, alse got new rad support in, had to change the rad support pearches out, they were rotten too. Going to replace all the body bushings, The red paint is all I had here, it will be painted black eventually Link to comment Share on other sites More sharing options...
Powerram Posted July 9, 2019 Author Report Share Posted July 9, 2019 Rad support is finished, next is onto brake lines, going to replace 100% of hard lines and flexlines Link to comment Share on other sites More sharing options...
Powerram Posted July 29, 2019 Author Report Share Posted July 29, 2019 Little bit further, have to do some work on the cab cross member and the rear spring pearches. Also have to fix a few box cross ribs Link to comment Share on other sites More sharing options...
autumnwalker Posted July 30, 2019 Report Share Posted July 30, 2019 Have we ever covered the length of this truck? Are you able to do a 3-point turn in a parking lot? lol A buddy of mine picked up a couple of extended cab, long bed F350's from auction as ex-CN rail trucks. We had to take up two spots (length) and could not make a full u-turn in the parking lot of the Ship Victory - actually had to 3-point our way out after lunch. Link to comment Share on other sites More sharing options...
Powerram Posted July 31, 2019 Author Report Share Posted July 31, 2019 15 hours ago, autumnwalker said: Have we ever covered the length of this truck? Are you able to do a 3-point turn in a parking lot? lol A buddy of mine picked up a couple of extended cab, long bed F350's from auction as ex-CN rail trucks. We had to take up two spots (length) and could not make a full u-turn in the parking lot of the Ship Victory - actually had to 3-point our way out after lunch. Haha, I dont know how it will do turning at this point, iv never driven this truck yet. Its not much longer than the ol red/white ford tom has, and it seems ok to turn Link to comment Share on other sites More sharing options...
Powerram Posted August 1, 2019 Author Report Share Posted August 1, 2019 No more progress yet, but im off all weekend, should get some work done on the ol truck. Hoping to pull both fuel tanks, and clean up the frame, also need to remove rear suspension. Hoping to have frame and a suspension prepped for reinstalling the box. Link to comment Share on other sites More sharing options...
autumnwalker Posted August 1, 2019 Report Share Posted August 1, 2019 2 hours ago, Powerram said: both fuel tanks They don't make 'em like this anymore. Link to comment Share on other sites More sharing options...
Powerram Posted August 21, 2019 Author Report Share Posted August 21, 2019 New used springs, new spring bushings, new u bolts, new shock mounts, new shocks, new rear spring shackle and perch, rebuilding 100% of the brakes, but at a stand still, ended up with 2 short driver side park brake cables. Also have to see if I have a good park brake lever piviot in a parts truck. Link to comment Share on other sites More sharing options...
Powerram Posted August 23, 2019 Author Report Share Posted August 23, 2019 Pivot bolts and bushings all same or worse that I have, ordered some new parts, but not everything was available so we will see what comes, ffs these rear brakes are poison to get parts for Link to comment Share on other sites More sharing options...
Powerram Posted August 24, 2019 Author Report Share Posted August 24, 2019 So ford doesn't have the parts I needed, but , I have built new piviot bolts, the ford piviot bushings worked on the new bolt, so passenger side rear brakes 100% done and new, onto the driver side, this has to be world record for longest brake job performed. First thing in the am I'll be tearing the driver side apart. Its dark now, and the musquiotos are lifting me off the ground Link to comment Share on other sites More sharing options...
sar4x4 Posted August 25, 2019 Report Share Posted August 25, 2019 19 hours ago, Powerram said: So ford doesn't have the parts I needed, but , I have built new piviot bolts, the ford piviot bushings worked on the new bolt, so passenger side rear brakes 100% done and new, onto the driver side, this has to be world record for longest brake job performed. First thing in the am I'll be tearing the driver side apart. Its dark now, and the musquiotos are lifting me off the ground Good luck sir! I will be tackling mine in a couple of weeks,,,,,,,,,,,,,,,, Installation. I THINK I have all of the correct parts...…….. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.