sar4x4 Posted April 14, 2016 Report Share Posted April 14, 2016 My steering components are now wonderfully tight when steering. Having said that, I think the bearing at the lower end of the steering column is bad. The shaft wobbles a bit there. Anyone know what the effect is and/or how to change it? Do I have to dis-assemble and rebuild the whole column or swap in a new column? I hope I can swap just the bearing while the column is in place. I do have a tilt column available, but no key, I'd have to swap the key cylinder. Thoughts? Link to comment Share on other sites More sharing options...
Powerram Posted April 14, 2016 Report Share Posted April 14, 2016 Yep , should be able to buy the bearing kit for that. Pull shaft off box and column, install from bottom. Link to comment Share on other sites More sharing options...
littlered Posted April 15, 2016 Report Share Posted April 15, 2016 i have an auto tilt coloum here eugene...same issue though with the key ....no biggie though one philips screw holds it in place Link to comment Share on other sites More sharing options...
sar4x4 Posted April 15, 2016 Author Report Share Posted April 15, 2016 BTW Nice looking truck on the highway at night Dave! Especially the front grille / lights! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.