TRUXterra Posted June 16, 2013 Report Share Posted June 16, 2013 So that's where mine went :P Installed the wireless keypad, in my gas tank cover (yup she fits). Troubleshooted a light and ended up ordering another. Got the keypad to work without issue? Link to comment Share on other sites More sharing options...
Command Posted June 16, 2013 Report Share Posted June 16, 2013 Entering into "program" mode was a PITA but once I figured that out it worked like a charm :) Link to comment Share on other sites More sharing options...
TRUXterra Posted June 16, 2013 Report Share Posted June 16, 2013 Completed the control box install & ran the wiring. Now need a little bit of welding & a battery cut-off switch to completed the winch install. Last pic shows the remote receiver installed. Yeah, I know my engine bay needs a bath ;) Link to comment Share on other sites More sharing options...
Eastcoastcam Posted June 16, 2013 Report Share Posted June 16, 2013 So that's where mine went :P Installed the wireless keypad, in my gas tank cover (yup she fits). Troubleshooted a light and ended up ordering another. Wireless keypad for what? Link to comment Share on other sites More sharing options...
TRUXterra Posted June 16, 2013 Report Share Posted June 16, 2013 It's a keypad to lock & unlock the doors. Link to comment Share on other sites More sharing options...
RobertMcC Posted June 16, 2013 Report Share Posted June 16, 2013 I'm guessing you don't got a gas tank door lock. If so would kinda defeat the purpose of keyless entry. Link to comment Share on other sites More sharing options...
Command Posted June 16, 2013 Report Share Posted June 16, 2013 I'm guessing you don't got a gas tank door lock. If so would kinda defeat the purpose of keyless entry. You got 'er, thought things through this time :P Link to comment Share on other sites More sharing options...
RobSinclair Posted June 16, 2013 Report Share Posted June 16, 2013 I installed my new Type-R rear diff breather today! I must have 20 more HP! http://www.4runners.org/writeups/typerdiff/index.html Link to comment Share on other sites More sharing options...
BlackPrintz Posted June 16, 2013 Report Share Posted June 16, 2013 I increased the height of my rear differential vent by at least a foot. The factory vent tube comes out of the rear axle on the passenger side of the diff, goes up about 6-8 inches and bends at a right angle and stops. I moved it up and attached it to the underside of my rear cargo area which is at least a foot higher than where it was. If the water is high enough to be sucked in by my diff, my butt's also going to be sucking water. Link to comment Share on other sites More sharing options...
robicon Posted June 17, 2013 Report Share Posted June 17, 2013 opps mess this up didnt add pics. Link to comment Share on other sites More sharing options...
robicon Posted June 17, 2013 Report Share Posted June 17, 2013 Removed a Zone sock and put on the rough country that I finally got... Rides better now having the same type shocks in the rear!! :) Me and the old man got er done today after explaining to him its not a strut and does not need to be compressed haha. Took it out to his work garage and did it there. Easy going even for this geek by trade ;) Link to comment Share on other sites More sharing options...
Eastcoastcam Posted June 17, 2013 Report Share Posted June 17, 2013 Get used to it if you are going to continue wheeling your Jeep. ...unless of course you are independently wealthy ;) Link to comment Share on other sites More sharing options...
robicon Posted June 17, 2013 Report Share Posted June 17, 2013 Get used to it if you are going to continue wheeling your Jeep. ...unless of course you are independently wealthy ;) True! The more I do myself the more I enjoy it. Nice break from fixing computers and other IT stuff. I wish I was wealthy now. Hopefully in time my education will pay off. I want a a garage badly. A house would be nice also ;) Link to comment Share on other sites More sharing options...
Command Posted June 17, 2013 Report Share Posted June 17, 2013 Reset BCM/ECU by unplugging the battery and letting her sit for awhile then reconnect the battery, hoping it would fix my transmission hanging issue. I also switched back to regular gas, so far she runs like before and tranny no longer hangs :) Link to comment Share on other sites More sharing options...
TRUXterra Posted June 17, 2013 Report Share Posted June 17, 2013 Hope it works for you! btw, running anything other than 87 will have no difference for engine performance unless you have a tuner (or haul heavy loads in warm weather)...the fuel grade used and your transmission shifting issues are not related. Link to comment Share on other sites More sharing options...
SQRLPWR Posted June 18, 2013 Report Share Posted June 18, 2013 For what its worth mine was shuddering on lockup...like driving on rumble-strips. An ATF change fixed it....presumably you've run some fresh oil through it? Link to comment Share on other sites More sharing options...
SQRLPWR Posted June 18, 2013 Report Share Posted June 18, 2013 took the ol' girl out for a run after replacing the clamp on my evap purge line - now for the first time ever I have gas cap WHOOOOOSSHH! :-D oh, and spotted a concrete block.....well you gotta don't ya? as you can see I couldn't get it up any further (mrs).....my street tires are freaking USELESS! Link to comment Share on other sites More sharing options...
TRUXterra Posted June 18, 2013 Report Share Posted June 18, 2013 took the ol' girl out for a run after replacing the clamp on my evap purge line - now for the first time ever I have gas cap WHOOOOOSSHH! :-D oh, and spotted a concrete block.....well you gotta don't ya? as you can see I couldn't get it up any further (mrs).....my street tires are freaking USELESS! What size are you running? I eye fu<k Kijiji several hours a day and tend to find deals (found my 285/70/17's M/T's within an hour or so of the post and also found another set of 235/75/15's M/T's within the hour for another person). If you're looking for something else, let me know! Link to comment Share on other sites More sharing options...
Command Posted June 18, 2013 Report Share Posted June 18, 2013 For what its worth mine was shuddering on lockup...like driving on rumble-strips. An ATF change fixed it....presumably you've run some fresh oil through it? Actually I have not run fresh oil through yet. Might have to get that done on my days off. Link to comment Share on other sites More sharing options...
SQRLPWR Posted June 19, 2013 Report Share Posted June 19, 2013 What size are you running? I eye fu<k Kijiji several hours a day and tend to find deals (found my 285/70/17's M/T's within an hour or so of the post and also found another set of 235/75/15's M/T's within the hour for another person). If you're looking for something else, let me know! I'm running 31x10.50x15's and thanks for the tip. I'm on the kijiji a lot and I saw there's a few sets come and go lately, but cash is a problem at the moment as the MVI is up in a few months and I'm battling with my CEL and rear ABS speed sensor. The X runs like a dream, but when I seafoamed her I noticed some smoke leakage under the hood, coupled with a P0420 I suspect I'll need zaust manifolds and possibly cats/o2 sensors to get it passed, and that's gonna sting!....unless I can find a friendly tester. Thanks, I'll certainly be in touch when the time is right. Link to comment Share on other sites More sharing options...
SQRLPWR Posted June 19, 2013 Report Share Posted June 19, 2013 Actually I have not run fresh oil through yet. Might have to get that done on my days off. All it took for me was a quick drain and refill....worth a try :-) Link to comment Share on other sites More sharing options...
Command Posted June 19, 2013 Report Share Posted June 19, 2013 Installed my roof light :) More pics in my build thread. Link to comment Share on other sites More sharing options...
SQRLPWR Posted June 20, 2013 Report Share Posted June 20, 2013 Pics? Link to comment Share on other sites More sharing options...
Command Posted June 20, 2013 Report Share Posted June 20, 2013 Pics? Edited previous post to add picture I thought I already added :p Link to comment Share on other sites More sharing options...
SQRLPWR Posted June 20, 2013 Report Share Posted June 20, 2013 Cool,I bet that's bright...like close encounters Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.