Jump to content

82Yota

Registered User
  • Posts

    842
  • Joined

  • Last visited

  • Days Won

    23

Everything posted by 82Yota

  1. I was waiting for that
  2. 82Yota

    Zuk

    To keep it from spinning? Just remove a plug and stick a length of rope in the cylinder so it only compresses so much. Works for the flywheel too. just make sure to tie a knit in the end or you're gonna spend a day fishing out the rope haha
  3. 82Yota

    Zuk

    Ill look into one on Monday, Rockauto has them for $58... but another $55 to have it shipped. Through me the shipping is free if its in Toronto or Montreal
  4. 82Yota

    Zuk

    I would still have it machined. You have a new clutch and pressure plate, might as well turn the flywheel so everything is on the same page.
  5. 82Yota

    Zuk

    Nova had my flywheel done in about an hour or so but they're busy these days so I'm not sure on how quick will be
  6. 82Yota

    Zuk

    That sammich looks a little hard on the teeth.
  7. 82Yota

    Zuk

    Ive never had luck with the grease trick but the paper towel and water trick works it just takes longer. Take small strips of papertowel. wet them in a bowl of water, ball them up and stick them in the bearing hole. When it gets full take a 1/4" socket extension and tap the balls of papertowel till they're flat, You gotta keep doing thatfor a bit but It will come out eventually
  8. 82Yota

    Zuk

    I have an actual engine hoist with air over hydraulic that you can borrow if you dont want to use that sketchy *** comealong
  9. 82Yota

    Zuk

    No worries, figured Id ask
  10. 82Yota

    Zuk

    What would you want for that plow gear on the front of the yellow one?
  11. 82Yota

    Zuk

    It will be in tomorrow, $?? roughly with tax. Comes with a tensioner pulley.
  12. 82Yota

    Zuk

    I already did hah
  13. 82Yota

    Zuk

    I can have it tomorrow. $137.44 with tax
  14. 82Yota

    Zuk

    Exedy clutch kit is $??? + tax and I can have it tomorrow .
  15. 82Yota

    Zuk

    Exedy clutch kits are $158.68 CAD on rockauto. Im not sure if I can beat that price but Ill look into it
  16. 82Yota

    Zuk

    x2 on that especially if its Exedy
  17. 82Yota

    Zuk

    Im just not a big fan of how they do business. They undercut a lot of the smaller guys by jobbing out to 3rd world shitholes and dont really pass these savings on to customers. I understand how big business works, I am just not a fan of it. It sucks because there are few companies out there that I wish didnt turn to crap over the years, trailmart being one and ballistic fab. Maybe ballistic is better now but they ripped a friend of mine off like $800 a few years back When it comes to this hobby, there arent a lot of original ideas anymore so most stuff is just a copy of a copy of a copy. Atleast when it comes to bolt on parts.
  18. 82Yota

    Zuk

    I just ordered disk brake adapters, shock hoops, front axle truss and creeper gussets from North west fab. Some of the stuff was trail gear, not a big fan of trailmart but gotta do what ya gotta do
  19. 82Yota

    Zuk

    And the toyota engine swaps not to mention the toyota axle swaps. Or a 4.3 vortec swap...
  20. 82Yota

    Zuk

    Rockauto engine rebuild kit part #EK500M is only $285.06 Should give it a little more snort
  21. 82Yota

    Zuk

    Wait, what? You sold your creation?
  22. We also have a lot of Eneos, Liqui-moly and Red line.
×
×
  • Create New...